Diagnosing a Hot Water System Failure: How to Do When It Stops Working
Diagnosing a Hot Water System Failure: How to Do When It Stops Working
Blog Article
We have stumbled on this article relating to What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and accepted it made sense to relate it with you on this site.
Several modern-day houses use an electric water heater for their heating unit, because of its comfort as well as ease of use. However, just like any other electric devices, issues may arise with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate or even also warm. Whatever the instance might be, hot water heater issues can be rather nerve-racking. Thankfully, we've made a list of possible services to your water heater problems. There are a number of elements that can cause a lot of these problems, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for safety and security. Whatever the issue is, getting it repaired should not present too much of a concern if you adhere to these steps:
Call A Professional:
If after changing all defective parts and also resetting your temperature, the hot water heater still isn't functioning, you may require to get in touch with an expert plumber for a specialist viewpoint. The problem with your heating system could be that the hot and cold faucets have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, an expert plumber would aid address the issue.
Check Your Power Supply:
As fundamental as this may appear, it is very needed. Without sufficient power, your hot water heater will not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the concern, just turn it off and on once more. Replace any kind of broken or damaged fuse. Examine the home appliance with power after these adjustments to see if it's now functioning.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to examine the temperature setups on your upper thermostat. Make sure the breaker is switched off before doing anything. Open up the access panel as well as press the red switch for temperature level reset above the thermostat. This must help warm the water. Transform the circuit breaker back on and inspect if the issue has actually been solved.
Check the Burner in the Water Heater:
If it's not a power issue, then try looking into your burner if it is still functioning. Test each of your burner to ensure the problem isn't with any one of them. If any one of them is defective, replace that part and after that check whether the hot water is back on.
Verdict
Hot water heater troubles are not constantly significant. A number of them result from minor issues like a blown fuse or damaged burner. Changing the faulty components need to suffice. Nonetheless, if you are still unable to address the issue, give a call to your nearby plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a serious reader on Hot Water Heater Repair, I was thinking sharing that article was really helpful. Sharing is good. Helping people is fun. Thank you for taking the time to read it.
Reliable every time! Report this page